a 5th order shear deformation theory considering transverse shear deformation effect as well as transverse normal strain deformation effect is presented for static flexure   analysis of simply supported isotropic plate. the assumed displacement field accounts for non-linear variation of in-plane displacements as well as transverse displacement through the plate thickness. the condition of zero ...

This paper presents in-plane electrostatic comb-drive actuators with stroke as large as 245 μm that is achieved by employing a novel Clamped Paired Double Parallelogram (C-DPDP) flexure mechanism. For a given flexure beam length, comb gap, and actuation voltage, this is currently the largest comb-drive actuator stroke reported in the literature. The C-DP-DP flexure mechanism design offers high ...

STATEMENT OF PROBLEM Mechanical properties of denture acrylic resins are important for the clinical success of multiple types of prostheses. Acrylic resins must be strong and resilient so as to withstand impact. Few studies utilize cyclic loads to characterize material response to repeated stress. PURPOSE The purpose of this study was to evaluate static and dynamic flexure properties of a var...

This article presents the analysis of experimental values regarding cracking pattern, specific strains and deformability for reinforced high strength concrete beams. The beams have the concrete class C80/95 and a longitudinal reinforcement ratio of 2.01%, respectively 3.39%. The elements were subjected to flexure under static short-term and long-term loading. The experimental values are compare...

The independent effect of dynamic flexure on the development of tissue engineered heart valves (TEHV) was investigated. Engineered heart valve tissues were constructed by seeding ovine smooth muscle cells onto rectangular scaffold strips and incubating the resultant constructs in a dynamic flexure bioreactor or under static conditions for three weeks. Tests indicated a trend of higher effective...

In this paper, we propose a 2-DOF parallel mechanism with flexure hinges. The kinematics and static analyses of this mechanism are studied in order to determine the kinematics properties, workspace, holding forces of the actuators and the reaction forces at the flexure hinges. These factors are useful for design process of this mechanism. The pseudo-rigid-body model (PRB model) of this mechanis...

In this study the influence of tubule orientation on the strength of human dentin under static and cyclic loads was examined. Rectangular beams were sectioned from the coronal dentin of virgin extracted molars (N=83) and then loaded in quasi-static 4-point flexure or 4-point flexural fatigue to failure. The flexure strength, energy to fracture and fatigue strength were evaluated for specimens w...

A 5th order shear deformation theory considering transverse shear deformation effect as well as transverse normal strain deformation effect is presented for static flexure   analysis of simply supported isotropic plate. The assumed displacement field accounts for non-linear variation of in-plane displacements as well as transverse displacement through the plate thickness. The condition of zero ...

This work investigates a new error source for angular velocity or attitude-based transfer alignment, which is caused by the coupling influence of dynamic flexure with ship angular motion. Most traditional studies do not consider this coupling error, as they often assume that dynamic flexure and ship angular motion are uncorrelated. However, the correlation between the dynamic flexure and the sh...

A compact 2-DOF (two degrees of freedom) piezoelectric-driven platform for 3D cellular bio-assembly systems has been proposed based on “Z-shaped” flexure hinges. Multiple linear motions with high resolution both in x and y directions are achieved. The “Z-shaped” flexure hinges and the parallel-six-connecting-rods structure are utilized to obtain the lowest working stress while compared with oth...